Home › SUSPENSION & AXLE › SUSPENSION › REAR LOWER ARM

REAR LOWER ARM > INSTALLATION

for Preparation Click here



1. TEMPORARILY TIGHTEN REAR LOWER CONTROL ARM


D028251E01
  1. Install the lower control arm, as shown in the illustration.



    D028250
  1. Provisionally tighten the bolt, nut and washer.



    C133063
  1. Provisionally tighten the bolt, nut and washer.



2. INSTALL PARKING BRAKE CABLE


C133062
  1. Install the parking brake cable onto the lower control arm.

    Torque:
    13 N*m{ 127 kgf*cm , 9 ft.*lbf }



3. INSTALL REAR WHEEL

Torque:
112 N*m{ 1,137 kgf*cm , 82 ft.*lbf }



4. STABILIZE SUSPENSION
  1. Jack down the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.



5. FULLY TIGHTEN REAR LOWER CONTROL ARM


C133064
  1. Fully tighten the 2 bolts.

    Torque:
    130 N*m{ 1,326 kgf*cm , 96 ft.*lbf }

    HINT:
    While fixing the nut, turn and install the bolt.