Home › SUSPENSION & AXLE › SUSPENSION › REAR LOWER ARM

REAR LOWER ARM > REMOVAL

for Preparation Click here



1. REMOVE REAR WHEEL


2. SEPARATE PARKING BRAKE CABLE


C133062
  1. Remove the bolt and separate the parking brake cable.



3. REMOVE REAR LOWER CONTROL ARM
  1. Support the rear axle housing.



    C133063
  1. Remove the bolt, nut and washer.

    HINT:
    While fixing the nut, turn and remove the bolt.



    D028250
  1. Remove the bolt, nut, washer and lower control arm.

    HINT:
    While fixing the nut, turn and remove the bolt.