Home › SUSPENSION & AXLE › SUSPENSION › REAR LATERAL CONTROL ROD

REAR LATERAL CONTROL ROD > INSTALLATION

for Preparation Click here



1. TEMPORARILY TIGHTEN REAR LATERAL CONTROL ROD


D028254
  1. Install the lateral control rod and provisionally tighten the bolt.



    D028255
  1. Provisionally tighten the bolt and nut.



2. STABILIZE SUSPENSION
  1. Jack down the vehicle.

  1. Bounce the vehicle up and down several times to stabilize the suspension.



3. FULLY TIGHTEN REAR LATERAL CONTROL ROD


D028256
  1. Fully tighten the 2 bolts.

    Torque:
    130 N*m{ 1,326 kgf*cm , 96 ft.*lbf }

    HINT:
    While fixing the nut, turn and install the bolt.