TRANSFER CASE OIL SEAL > REMOVAL |
| 1. DRAIN TRANSFER OIL |
| 2. REMOVE LOWER TRANSFER CASE PROTECTOR |
![]() |
Remove the 4 bolts and protector.
| 3. REMOVE FRONT PROPELLER SHAFT ASSEMBLY |
![]() |
Place matchmarks on the propeller shaft flange and differential flange.
Remove the 4 nuts, 4bolts and 4 washers.
![]() |
Place matchmarks on the propeller shaft flange and transfer flange.
Remove the 4 nuts, 4 washers and the propeller shaft assembly.
| 4. REMOVE OUTPUT SHAFT COMPANION FLANGE SUB-ASSEMBLY |
Using a chisel and hammer, loosen the staked part of the lock nut.
![]() |
Using SST to hold the companion flange, remove the lock nut.
![]() |
Using SST, remove the companion flange.
| 5. REMOVE TRANSFER OUTPUT SHAFT COMPANION FLANGE OIL SEAL (for Front) |
Using a screwdriver and hammer, tap out the oil seal from the companion flange.
| 6. REMOVE TRANSFER CASE OIL SEAL |
![]() |
Using SST, tap out the oil seal.