Home › DRIVE LINE ยท PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY

PROPELLER SHAFT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE REAR PROPELLER SHAFT ASSEMBLY (for 2WD)


C098700E02
  1. Place matchmarks on the propeller shaft flange and differential flange.

  1. Remove the 4 nuts, 4 bolts and 4 washers.

  1. Remove the propeller shaft assembly.



    C098710E01
  1. Insert SST into the extension housing to prevent oil leakage.

    SST
    09325-40010  



2. REMOVE REAR PROPELLER SHAFT ASSEMBLY (for 4WD)


C098699E02
  1. Place matchmarks on the propeller shaft flange and transfer flange.

  1. Remove the 4 nuts and 4 washers.



    C098700E02
  1. Place matchmarks on the propeller shaft flange and differential flange.

  1. Remove the 4 nuts, 4 bolts, 4 washers and the propeller shaft assembly.