DIFFERENTIAL CARRIER OIL SEAL > INSTALLATION |
| 1. INSTALL REAR DIFFERENTIAL DRIVE PINION BEARING SPACER |
![]() |
Install a new rear differential drive pinion bearing spacer.
| 2. INSTALL DIFFERENTIAL OIL STORAGE RING |
![]() |
Using SST and hammer, tap in a new differential oil storage ring.
| 3. INSTALL REAR DRIVE PINION FRONT TAPERED ROLLER BEARING |
![]() |
Using SST and hammer, tap in the rear drive pinion front roller bearing (outer).
Install the rear drive pinion front roller bearing (inner).
| 4. INSTALL REAR DIFFERENTIAL DRIVE PINION OIL SLINGER |
![]() |
Install the rear differential drive pinion oil slinger.
| 5. INSTALL REAR DIFFERENTIAL CARRIER OIL SEAL |
![]() |
| *1 | Oil Seal Depth |
Apply MP grease to the lip of a new oil seal.
Using SST and hammer, tap in the rear differential carrier oil seal.
| 6. INSTALL REAR DRIVE PINION COMPANION FLANGE SUB-ASSEMBLY |
![]() |
Using SST, install the rear drive pinion companion flange sub-assembly.
![]() |
Using SST to hold the companion flange in place, install the rear drive pinion nut.
| 7. INSTALL DIFFERENTIAL DRIVE PINION PRELOAD |
![]() |
Using a torque wrench, measure the preload.
| Bearing | Standard |
| New bearing | 0.83 to 2.18 N*m (8.64 to 22.2 kgf*cm, 7.35 to 19.3 in.*lbf) |
| Used bearing | 0.88 to 1.98 N*m (8.97 to 20.2 kgf*cm, 7.79 to 17.5 in.*lbf) |
| 8. STAKE REAR DRIVE PINION NUT |
![]() |
Using a chisel and hammer, stake the rear drive pinion nut.
| 9. INSTALL PROPELLER SHAFT ASSEMBLY |
Install the propeller shaft assembly (Click here).
| 10. ADD DIFFERENTIAL OIL |
![]() |
Stop the vehicle on a level surface.
Remove the differential filler plug and gasket.
Check that the oil level is between 0 to 5 mm (0 to 0.20 in.) from the bottom lip of the differential filler plug hole.
| Item | Capacity | |
| Front Differential | w/o A.D.D. | 1.35 to 1.45 Liters (1.43 to 1.53 US qts, 1.19 to 1.28 Imp qts.) |
| w/ A.D.D. | 1.50 to 1.60 Liters (1.59 to 1.69 US qts, 1.32 to 1.41 Imp qts.) | |
| Rear Differential | w/o Differential Lock | 2.45 to 2.55 Liters (2.59 to 2.69 US qts, 2.16 to 2.24 Imp qts.) |
| w/ Differential Lock | 2.40 to 2.50 Liters (2.54 to 2.64 US qts, 2.11 to 2.20 Imp qts.) | |
Check for oil leakage when the oil level is low.
Install the differential filler plug with a new gasket.
| 11. INSPECT DIFFERENTIAL OIL LEAK |