REAR BRAKE FLEXIBLE HOSE > REMOVAL |
| 1. REMOVE REAR WHEEL |
| 2. DRAIN BRAKE FLUID |
| 3. REMOVE REAR FLEXIBLE HOSE |
![]() |
Remove the union bolt and gasket and separate the flexible hose from the disc brake cylinder.
Using a union nut wrench, separate the brake tube while holding the flexible hose with a wrench.
Remove the clip and flexible hose.
| 4. REMOVE REAR BRAKE TUBE FLEXIBLE HOSE |
![]() |
Using a union nut wrench, separate the brake tubes while holding the flexible hose with a wrench.
Remove the 2 clips and flexible hose.