Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT ASSEMBLY

HEADLIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT ASSEMBLY


E127193E01
  1. Install the headlight onto the vehicle.

  1. Tighten the 3 screws.

  1. Connect the 2 connectors.



2. INSTALL FRONT BUMPER FILLER


E127192
  1. Engage the 2 claws and clip and install the front bumper filler.



3. INSTALL RADIATOR GRILLE
  1. Engage the 5 clips and install the radiator grille.

  1. Install the 2 screws.

    Torque:
    3.0 N*m{ 31 kgf*cm , 27 in.*lbf }

  1. Install the 2 clips.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }