Home › BODY ELECTRICAL › LIGHTING › REAR COMBINATION LIGHT ASSEMBLY

REAR COMBINATION LIGHT ASSEMBLY > REASSEMBLY

for Preparation Click here



1. INSTALL REAR TURN SIGNAL LIGHT BULB
  1. Install the rear turn signal light bulb into the rear turn signal light socket.



2. INSTALL REAR TURN SIGNAL LIGHT SOCKET


    E148342
  1. Turn the rear turn signal light socket with the rear turn signal light bulb, in the direction indicated by the arrow in the illustration to install them.



3. INSTALL BACK UP LIGHT BULB
  1. Install the back up light bulb into the back up light socket.



4. INSTALL BACK UP LIGHT SOCKET


    E148343
  1. Turn the back up light socket with the back up light bulb, in the direction indicated by the arrow in the illustration to install them.



5. INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY


    E148345
  1. Connect the connector.

  1. Attach the 3 clamps to install the rear combination light socket and wire sub-assembly to the rear combination light.



6. INSTALL TAIL AND STOP LIGHT BULB
  1. Install the tail and stop light bulb into the rear combination light socket and wire sub-assembly.



    E148344
  1. Turn the rear combination light socket and wire sub-assembly with the tail and stop bulb, in the direction indicated by the arrow in the illustration to install them.



7. INSTALL REAR COMBINATION LIGHT GASKET


    E148338
  1. Install a new rear combination light gasket onto rear combination light lens.