Home › BODY ELECTRICAL › LIGHTING › LICENSE PLATE LIGHT ASSEMBLY

LICENSE PLATE LIGHT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL LICENSE PLATE LIGHT BULB


E127213
  1. Install the license plate light bulb into the socket.



2. INSTALL LICENSE PLATE LIGHT LENS GASKET


E127212
  1. Install the license plate light lens gasket onto the license plate light lens.



3. INSTALL LICENSE PLATE LIGHT LENS


E127211
  1. Install the license plate light lens with the 2 screws.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }