Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT DIMMER SWITCH

HEADLIGHT DIMMER SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT DIMMER SWITCH


E127237
  1. Install the headlight dimmer switch with the 2 screws.

  1. Connect the connector.



2. INSTALL STEERING COLUMN COVER


E127253
  1. Engage the claw and install the upper steering column cover.



    E127235
  1. Engage the 2 claws and install the lower steering column cover.



    E127232
  1. Turn the steering wheel to the right and tighten the screw indicated in the illustration.



    E127231
  1. Turn the steering wheel to the left and tighten the screw indicated in the illustration.



    E127233
  1. Tighten the screw indicated in the illustration.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }