Home › BODY ELECTRICAL › LIGHTING › REAR DOOR COURTESY SWITCH (for Lower Side)

REAR DOOR COURTESY SWITCH (for Lower Side) > INSPECTION

for Preparation Click here



1. INSPECT ACCESS PANEL LOWER LOCK ASSEMBLY


E127241E01
  1. Check the resistance of the rear door courtesy switch.

    1. Using an ohmmeter, measure the resistance between the terminals when the latch is operated with a screwdriver.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Open
      Below 1 Ω
      1 - 2
      Half Latch
      Below 1 Ω
      1 - 2
      Full Latch
      10 kΩ or higher

      If the result is not as specified, replace the access panel lower lock.