Home › BODY ELECTRICAL › LIGHTING › HEADLIGHT RELAY

HEADLIGHT RELAY > ON-VEHICLE INSPECTION

for Preparation Click here



1. INSPECT HEADLIGHT RELAY


E109076E01
  1. Check the resistance.

  1. Using an ohmmeter, measure the resistance between the terminals.

    Standard Resistance:
    Tester Connection
    Specified Condition
    3 - 5
    10 kΩ or higher
    3 - 5
    Below 1 Ω
    (Battery voltage applied to terminals 1 and 2)

    If the result is not as specified, replace the headlight relay.