INVERTER MAIN SWITCH > INSTALLATION |
| 1. INSTALL INVERTER MAIN SWITCH |
Engage the 2 claws and install the inverter main switch.
| 2. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY |
![]() |
Engage the 3 clips and 2 claws and install the instrument lower cover.
Install the 2 <F> bolts and 2 clips.
| 3. INSTALL CONSOLE BOX ASSEMBLY REAR |
![]() |
Engage the 5 claws and install the front console box.
Install the 4 <D> screws.
| 4. INSTALL BOX BOTTOM MAT |
![]() |
Install the box bottom mat.
| 5. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY |
![]() |
Engage the 3 claws and 5 clips and install the console upper rear panel.
| 6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD) |
![]() |
Install the shift lever knob.
| 7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission) |
![]() |
Install the shift lever knob.
| 8. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY |
![]() |
Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 C claws.
Engage the 4 claws and install the parking brake hole cover.