Home › BODY ELECTRICAL › WIPER AND WASHER › WASHER NOZZLE

WASHER NOZZLE > REMOVAL

for Preparation Click here



1. REMOVE FRONT WASHER NOZZLE

HINT:
Use the same procedure as for the opposite side.



    E129638E01
  1. Disconnect the washer hose.

  1. Using a screwdriver with its tip wrapped in protective tape, remove the washer nozzle.



2. REMOVE NO.1 REAR SPOILER COVER (w/ Rear Wiper)


B135550
  1. Remove the 4 screws and No. 1 rear spoiler cover.



3. REMOVE REAR WASHER NOZZLE (w/ Rear Wiper)


    E129639E01
  1. Disconnect the washer hose.

  1. Using a screwdriver with its tip wrapped in protective tape, remove the washer nozzle.