Home › BODY › WINDSHIELD / WINDOWGLASS › WINDOW DEFOGGER SWITCH

WINDOW DEFOGGER SWITCH > INSPECTION

for Preparation Click here



1. INSPECT INTEGRATION CONTROL AND PANEL ASSEMBLY


    B139386E01
  1. Check the operation of the window defogger switch indicator.

    1. Connect the positive (+) battery lead to terminal 1 and negative (-) battery lead to terminal 20, then check the indicator operation.

      Standard:
      Switch Condition
      Specified Condition
      ON
      Indicator illuminates
      OFF
      Indicator turns off

      If the result is not as specified, replace the integration control and panel.



    2. B140028E01
    3. Under the above condition, connect the positive (+) battery lead to terminal 2, then check the indicator operation.

      Standard:
      Switch Condition
      Specified Condition
      ON
      Indicator Dims
      OFF
      Indicator turns off

      If the result is not as specified, replace the integration control and panel.