Home › BODY ELECTRICAL › LIGHTING › HAZARD WARNING SWITCH

HAZARD WARNING SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL INTEGRATION CONTROL AND PANEL ASSEMBLY


B133888
  1. Engage the 4 clips and install the integration control and panel.

  1. Install the 2 screws.



2. INSTALL INSTRUMENT PANEL GARNISH LH


    B133886
  1. Engage the 3 clips and install the instrument panel garnish.

  1. Install 2 <H> screws.



3. INSTALL INSTRUMENT PANEL GARNISH RH


    B133887
  1. Engage the 3 clips and install the instrument panel garnish.

  1. Install screw <H>.



4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }