Home › BODY ELECTRICAL › AUDIO / VISUAL › STEREO JACK ADAPTER ASSEMBLY

STEREO JACK ADAPTER ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL STEREO JACK ADAPTER ASSEMBLY


    B135183
  1. Engage the 2 claws and install the stereo jack adapter.



2. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY


    B133852
  1. Engage the 3 clips and 2 claws and install the instrument lower cover.

  1. Install the 2 <F> bolts and 2 clips.



3. INSTALL FRONT CONSOLE BOX


    B133851
  1. Engage the 5 claws and install the front console box.

  1. Install the 4 <D> screws.



4. INSTALL FRONT CONSOLE BOX BOTTOM MAT


    B133899
  1. Install the box bottom mat.



5. INSTALL FRONT CONSOLE BOX UPPER PANEL SUB-ASSEMBLY


    B133897
  1. Engage the 3 claws and 5 clips and install the console upper rear panel.



6. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY


B133901E01
  1. Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 C claws.

  1. Engage the 4 claws and install the parking brake hole cover.



7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)


    B133896
  1. Install the shift lever knob.



8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)


    B133894
  1. Install the shift lever knob.



9. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }