Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › BACK SONAR SWITCH ASSEMBLY

BACK SONAR SWITCH ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL BACK SONAR SWITCH BULB CAP


    B135187
  1. Install the back sonar switch bulb cap.



2. INSTALL BACK SONAR SWITCH BULB


    B135186
  1. Install the back sonar switch bulb.



3. INSTALL BACK SONAR SWITCH ASSEMBLY


    B135185
  1. Engage the 2 claws and install the back sonar switch.



4. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY


    B133852
  1. Engage the 3 clips and 2 claws and install the instrument lower cover.

  1. Install the 2 <F> bolts and 2 clips.



5. INSTALL FRONT CONSOLE BOX


    B133851
  1. Engage the 5 claws and install the front console box.

  1. Install the 4 <D> screws.



6. INSTALL FRONT CONSOLE BOX BOTTOM MAT


    B133899
  1. Install the box bottom mat.



7. INSTALL FRONT CONSOLE BOX UPPER PANEL SUB-ASSEMBLY


    B133897
  1. Engage the 3 claws and 5 clips and install the console upper rear panel.



8. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY


B133901E01
  1. Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 C claws.

  1. Engage the 4 claws and install the parking brake hole cover.



9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)


    B133896
  1. Install the shift lever knob.



10. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)


    B133894
  1. Install the shift lever knob.



11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
3.9 N*m{ 40 kgf*cm , 35 in.*lbf }