Home › ENGINE › 1GR-FE EMISSION CONTROL › PCV VALVE

PCV VALVE > INSPECTION

for Preparation Click here



1. INSPECT VENTILATION VALVE SUB-ASSEMBLY
  1. Install a clean hose to the ventilation valve.



  1. Check the ventilation valve operation.



      A192760E04
    1. Blow air into the cylinder head side, and check that air passes through easily.
      Text in Illustration 
      *1
      Hose
      *a
      Air

      CAUTION:
      1. Do not suck air through the valve.
      2. Petroleum substances inside the valve are hazardous to your health.



    2. A192761E05
    3. Blow air into the intake manifold side, and check that air passes through with difficulty.
      Text in Illustration 
      *1
      Hose
      *a
      Air
      If the result is not as specified, replace the ventilation valve.

  1. Remove the clean hose from the ventilation valve.