FRONT PASSENGER SEAT BELT WARNING LIGHT > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE INSTRUMENT PANEL GARNISH RH |
![]() |
Remove screw <H>.
Disengage the 3 clips and remove the instrument panel garnish.
| 3. REMOVE INSTRUMENT PANEL GARNISH LH |
![]() |
Remove screw <H>.
Disengage the 3 clips and remove the instrument panel garnish.
| 4. REMOVE INTEGRATION CONTROL PANEL ASSEMBLY (Built-in Front Passenger Seat Belt Warning Light) |
![]() |
Remove the 2 screws.
Disengage the 4 clips and remove the front passenger seat belt warning light.
Disconnect the 2 air conditioner amplifier connectors and the blower switch connector.