Power steering fluid
| Fluid level rise
| Maximum
| 5 mm (0.20 in.)
|
Fluid pressure at idle speed with valve closed
| 8.3 MPA Type
| 8300 to 9000 kPa (85 to 92 kgf/cm2, 1203 to 1305 psi)
|
Fluid pressure at idle speed with valve closed
| 10.0 MPA Type
| 10000 to 10700 kPa (102 to 109 kgf/cm2, 1450 to 1552 psi)
|
Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position
| 8.3 MPA Type
| 8300 to 9000 kPa (85 to 92 kgf/cm2, 1203 to 1305 psi)
|
Fluid pressure at idle speed with valve fully open and turn the steering wheel to the full lock position
| 10.0 MPA Type
| 8300 to 8800 kPa (85 to 90 kgf/cm2, 1203 to 1276 psi)
|
Fluid pressure at idle speeds of 1000 rpm and 3000 rpm
|
| 490 kPa (5 kgf/cm2, 71 psi) or less
|
Steering wheel
| Steering effort at idle speed
| Reference
| 6.0 N*m (60 kgf*cm, 53 in.*lbf)
|
Power steering vane pump
| Vane pump rotating torque
| 0.27 N*m (2.8 kgf*cm, 2.4 in.*lbf) or less
|
Vane plate height
| Minimum
| 7.6 mm (0.299 in.)
|
Vane plate thickness
| Minimum
| 1.405 mm (0.0553 in.)
|
Vane plate length
| Minimum
| 11.993 mm (0.4722 in.)
|
Clearance between the rotor groove and plate
| Maximum
| 0.025 mm (0.0010 in.)
|
Spring free length
| Minimum
| 29.2 mm (1.150 in.)
|
Oil seal clearance
| Standard clearance
| 0.021 to 0.043 mm (0.0008 to 0.0017 in.)
|
Oil seal clearance
| Maximum
| 0.07 mm (0.0028 in.)
|
Power steering linK
| Total preload (tie rod rotating torque)
| Turning
| 1.0 to 3.9 N*m (10 to 39 kgf*cm, 9 to 34 in.*lbf)
|
Total preload (pinion shaft rotating torque)
| Turning
| 1.6 to 2.3 N*m (16 to 23 kgf*cm, 14 to 20 in.*lbf)
|