Home › ENGINE › 1GR-FE EMISSION CONTROL › PURGE VALVE

PURGE VALVE > REMOVAL

for Preparation Click here



1. REMOVE V-BANK COVER


    A229925E02
  1. Raise the front of the V-bank cover to disengage the 2 pins.
    Text in Illustration 
    *1
    Pin
    *2
    Hook
    *3
    No. 1 V-bank Cover Bracket

  1. Disengage the 2 hooks and remove the V-bank cover from the No. 1 V-bank cover bracket.



2. REMOVE PURGE VSV


    A223554
  1. Disconnect the purge VSV connector.

  1. Disconnect the No. 1 fuel vapor feed hose and fuel vapor feed hose.



    A223555
  1. Remove the bolt and purge VSV.