Home › ENGINE › 1GR-FE INTAKE › AIR CLEANER AND HOSE

AIR CLEANER AND HOSE > REMOVAL

for Preparation Click here



1. REMOVE V-BANK COVER


    A229925E02
  1. Raise the front of the V-bank cover to disengage the 2 pins.
    Text in Illustration 
    *1
    Pin
    *2
    Hook
    *3
    No. 1 V-bank Cover Bracket

  1. Disengage the 2 hooks and remove the V-bank cover from the No. 1 V-bank cover bracket.



2. REMOVE AIR CLEANER CAP AND HOSE


    A227193
  1. Disconnect the MAF meter connector.

  1. Disengage the 4 wire harness clamps.

  1. Disconnect the ventilation hose and vacuum hose.

  1. Remove the bolt.

  1. Loosen the No. 1 air cleaner hose clamp.

  1. Release the 4 hinges.

  1. Remove the air cleaner cap and hose.



3. REMOVE AIR CLEANER FILTER ELEMENT SUB-ASSEMBLY
  1. Remove the air cleaner filter element sub-assembly from the air cleaner case sub-assembly.



4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY


    A226753
  1. Remove the 3 bolts and the air cleaner case sub-assembly.



5. REMOVE AIR CLEANER CAP SUB-ASSEMBLY


    A226754
  1. Loosen the hose clamp and remove the air cleaner cap sub-assembly.



6. REMOVE INTAKE AIR RESONATOR


    A226755
  1. Loosen the 2 hose clamps and remove the intake air resonator.



7. REMOVE NO. 1 AIR CLEANER HOSE


    A229793
  1. Remove the union (fog air cleaner hose) tube from the No. 1 air cleaner hose.