Home › SECURITIES › ENGINE IMMOBILISER › TRANSPONDER KEY AMPLIFIER

TRANSPONDER KEY AMPLIFIER > INSTALLATION

for Preparation Click here



1. INSTALL TRANSPONDER KEY AMPLIFIER


E149558
  1. Engage the 2 claws and install the transponder key amplifier.

  1. Connect the connector.



2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH


E146361
  1. Engage the claw and 5 clips and install the lower instrument panel finish panel.

  1. Tighten the 2 bolts.



3. INSTALL INSTRUMENT PANEL FINISH PLATE


E149563E02
  1. Install the instrument panel finish plate.



4. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    B133859
  1. Engage the 3 claws and install the hood lock control lever.



5. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    B133853
  1. Engage the 4 clips and 2 claws and install the instrument panel register.



6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

HINT:
Use the same procedure as for the RH side .



7. INSTALL COWL SIDE TRIM BOARD LH

HINT:
Use the same procedure as for the RH side .



8. INSTALL FOOTREST CLIP


B130588

HINT:
Use the same procedure for both sides.

  1. Engage the 2 claws and install the footrest clip.



9. INSTALL FRONT FLOOR FOOTREST


    B130589
  1. Engage the 2 studs and install the front floor footrest.



10. INSTALL FRONT DOOR SCUFF PLATE LH

HINT:
Use the same procedure as for the RH side .