TRANSPONDER KEY AMPLIFIER > REMOVAL |
| 1. REMOVE FRONT DOOR SCUFF PLATE LH |
| 2. REMOVE FRONT FLOOR FOOTREST |
![]() |
Disengage the 4 claws and remove the front floor footrest.
| 3. REMOVE FOOTREST CLIP |
![]() |
Remove the 2 footrest clips.
| 4. REMOVE COWL SIDE TRIM BOARD LH |
| 5. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP LH |
| 6. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() |
Disengage the 4 clips and 2 claws and remove the instrument panel register.
| 7. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY |
![]() |
Disengage the 3 claws and separate the hood lock control lever.
| 8. REMOVE INSTRUMENT PANEL FINISH PLATE |
![]() |
Using a screwdriver with its tip wrapped in protective tape, remove the instrument panel finish plate.
| 9. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LH |
![]() |
Remove the 2 bolts.
Disengage the claw and 5 clips and remove the lower instrument panel finish panel.
| 10. REMOVE TRANSPONDER KEY AMPLIFIER |
![]() |
Disconnect the connector.
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the transponder key amplifier.