Home › ENGINE › 1GR-FE FUEL › FUEL PUMP ECU

FUEL PUMP ECU > REMOVAL

for Preparation Click here



1. REMOVE FUEL PUMP CONTROL ECU ASSEMBLY (w/ Secondary Air Injection System)


    A282108
  1. Press the claw and move the lever in the direction of the arrow in the illustration.

  1. Disconnect the fuel pump control ECU assembly connector.



    A282109
  1. Remove the 2 bolts from the frame sub-assembly.

  1. Disengage the hook and remove the fuel pump control ECU assembly from the frame sub-assembly.

    NOTICE:
    Make sure the fuel pump control ECU assembly is not subjected to physical shocks such as being dropped, etc.



    A282111
  1. Remove the 4 screws and the No. 1 fuel pump control ECU bracket and No. 2 fuel pump control ECU bracket from the fuel pump control ECU assembly.



2. REMOVE FUEL PUMP CONTROL ECU ASSEMBLY (w/o Secondary Air Injection System)


    A282105
  1. Disconnect the 2 fuel pump control ECU assembly connectors.



    A282106
  1. Remove the 2 bolts from the frame sub-assembly.

  1. Disengage the hook and remove the fuel pump control ECU assembly from the frame sub-assembly.

    NOTICE:
    Make sure the fuel pump control ECU assembly is not subjected to physical shocks such as being dropped, etc.