Home › BRAKE › BRAKE CONTROL › A-TRAC SWITCH (w/o CRAWL)

A-TRAC SWITCH (w/o CRAWL) > REMOVAL

for Preparation Click here



1. REMOVE PARKING BRAKE HOLE COVER SUB-ASSEMBLY


B133898E02
  1. Disengage the 2 A claws and 2 B claws.

  1. Slide the parking brake hole cover toward the front of the vehicle, disengage the 2 C claws and remove the parking brake hole cover.



2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)


    B133893
  1. Remove the shift lever knob.



3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)


    B133895
  1. Remove the shift lever knob.



4. REMOVE CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B133897
  1. Shift the shift lever into the N position.

  1. Disengage the 5 clips and 3 claws and remove the console upper rear panel.



5. REMOVE BOX BOTTOM MAT


    B133899
  1. Remove the box bottom mat.



6. REMOVE FRONT CONSOLE BOX


    B133851
  1. Remove the 4 <D> bolts.

  1. Disengage the 5 claws and remove the console box.



7. REMOVE INSTRUMENT LOWER COVER SUB-ASSEMBLY


    B133852
  1. Remove the 2 clips and 2 <F> bolts.

  1. Disengage the 3 clips and 2 claws and remove the instrument lower cover.



8. REMOVE NO. 2 TRACTION CONTROL SWITCH (A-TRAC SWITCH)


    C234005
  1. Disengage the 2 claws and remove the No. 2 traction control switch (A-TRAC switch).