Home › DRIVE LINE ยท DIFFERENTIAL › REAR DIFFERENTIAL LOCK CONTROL SWITCH (w/o CRAWL)

REAR DIFFERENTIAL LOCK CONTROL SWITCH (w/o CRAWL) > INSTALLATION

for Preparation Click here



1. INSTALL DIFFERENTIAL LOCK SWITCH
  1. Engage the 2 claws to install the differential lock switch to the instrument lower cover sub-assembly.



2. INSTALL INSTRUMENT LOWER COVER SUB-ASSEMBLY


    B133852
  1. Engage the 3 clips and 2 claws and install the instrument lower cover.

  1. Install the 2 <F> bolts and 2 clips.



3. INSTALL FRONT CONSOLE BOX


    B133851
  1. Engage the 5 claws and install the front console box.

  1. Install the 4 <D> screws.



4. INSTALL BOX BOTTOM MAT


    B133899
  1. Install the box bottom mat.



5. INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY


    B133897
  1. Engage the 3 claws and 5 clips and install the console upper rear panel.



6. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for 4WD)


    B133896
  1. Install the shift lever knob.



7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transmission)


    B133894
  1. Install the shift lever knob.



8. INSTALL PARKING BRAKE HOLE COVER SUB-ASSEMBLY


B133901E01
  1. Slide the parking brake hole cover toward the rear of the vehicle and engage the 2 C claws.

  1. Engage the 4 claws and install the parking brake hole cover.