Home › ENGINE › 1GR-FE EMISSION CONTROL › AIR PUMP (w/ Secondary Air Injection System)

AIR PUMP (w/ Secondary Air Injection System) > INSPECTION

for Preparation Click here



1. INSPECT AIR PUMP ASSEMBLY


    A226958E03
  1. Measure the resistance according to the value(s) in the table below.
    Text in Illustration 
    *a
    Component without harness connected
    (Air Pump Assembly)

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 (APH+) - 3 (APHG)
    -20°C (-4°F)
    3.6 to 17.6 Ω
    -10°C (14°F)
    3.4 to 16.5 Ω
    0°C (32°F)
    3.1 to 15.4 Ω
    10°C (50°F)
    2.8 to 14.3 Ω
    20°C (68°F)
    2.7 to 13.2 Ω

    If the result is not as specified, replace the air pump assembly.