AIR PUMP (w/ Secondary Air Injection System) > REMOVAL |
| 1. REMOVE AIR PUMP COVER |
![]() |
Disengage the 3 claws and remove the air pump cover from the air pump assembly.
| 2. DISCONNECT NO. 1 AIR INJECTION SYSTEM HOSE |
![]() |
Remove the hose clamp from the No. 1 air injection system hose and No. 1 radiator hose.
Loosen the hose clip and disconnect the No. 1 air injection system hose from the air pump assembly.
| 3. REMOVE AIR PUMP ASSEMBLY |
![]() |
Disconnect the air pump assembly connector.
Disengage the wire harness clamp and separate the wire harness from the No. 1 air pump bracket.
![]() |
Remove the 3 bolts and the air pump assembly with No. 1 air pump bracket from the engine room compartment.
![]() |
Disengage the 2 wire harness clamps and separate the wire harness from the No. 1 air pump bracket.
![]() |
Disengage the 3 fittings of the air pump insulator and remove the air pump assembly from the No. 1 air pump bracket.
| 4. REMOVE AIR PUMP INSULATOR |
![]() |
Remove the 3 air pump insulators from the No. 1 air pump bracket.
| 5. REMOVE INLET AIR PUMP |
![]() |
Disengage the 4 claws and remove the inlet air pump from the air pump assembly.