PERSONAL LIGHT ASSEMBLY (w/ CRAWL) > INSPECTION |
| 1. INSPECT PERSONAL LIGHT ASSEMBLY |
![]() |
Apply battery voltage to the connector and check the personal light comes on.
| *a | Component without harness connected (Personal Light Assembly) |
| Condition | Switch Condition | Specified Condition |
| Battery positive (+) → 1(L) Battery negative (-) → 2(B) | All switches off | All lights do not come on |
| Battery positive (+) → 1(L) Battery negative (-) → 2(B) | LH side switch on | LH side light comes on |
| Battery positive (+) → 1(L) Battery negative (-) → 2(B) | RH side switch on | RH side light comes on |