Home › BODY ELECTRICAL › LIGHTING › PERSONAL LIGHT ASSEMBLY (w/ CRAWL)

PERSONAL LIGHT ASSEMBLY (w/ CRAWL) > REMOVAL

for Preparation Click here



1. REMOVE PERSONAL LIGHT ASSEMBLY


    E260472
  1. Using a moulding remover, disengage the 4 clips and 4 guides.



    E260473E01
  1. Disconnect the connector and remove the personal light assembly.
    Text in Illustration 
    *1
    Grommet
    *2
    Pin

  1. Remove the 4 pins.

  1. Remove the 4 grommets from the body side.