PERSONAL LIGHT ASSEMBLY (w/ CRAWL) > DISASSEMBLY |
| 1. REMOVE PERSONAL LIGHT BULB |
![]() |
Turn the 2 personal light bulb sockets in the direction indicated by the arrows in the illustration to remove them.
Remove the 2 personal light bulbs from the 2 personal light bulb sockets.
| 2. REMOVE NO. 2 ROOF WIRE |
![]() |
Disconnect the connectors.
| *1 | Clamp |
| *2 | Guide |
Disengage the 3 guides and clamp to remove the No. 2 roof wire.
| 3. REMOVE CRAWL CONTROL SWITCH ASSEMBLY |
![]() |
Remove the 6 screws from the face plate sub-assembly.
![]() |
Disengage the 4 claws and 2 guides to remove the bulb housing sub-assembly from the face plate sub-assembly.
![]() |
Remove the 4 screws and the crawl control switch assembly from the face plate sub-assembly.
| 4. REMOVE SPARE SWITCH HOLE COVER |
![]() |
Disengage the 2 claws to remove the spare switch hole cover.
| 5. REMOVE TRANSFER POSITION SWITCH (A-TRAC SWITCH) |
![]() |
Disengage the 2 claws to remove the transfer position switch (A-TRAC switch).
| 6. REMOVE REAR DIFFERENTIAL LOCK SWITCH |
![]() |
Disengage the 2 claws to remove the rear differential lock switch.