PERSONAL LIGHT ASSEMBLY (w/ CRAWL) > REASSEMBLY |
| 1. INSTALL REAR DIFFERENTIAL LOCK SWITCH |
![]() |
Engage the 2 claws to install the rear differential lock switch.
| 2. INSTALL TRANSFER POSITION SWITCH (A-TRAC SWITCH) |
![]() |
Engage the 2 claws to install the transfer position switch (A-TRAC switch).
| 3. INSTALL SPARE SWITCH HOLE COVER |
![]() |
Engage the 2 claws to install the spare switch hole cover.
| 4. INSTALL CRAWL CONTROL SWITCH ASSEMBLY |
![]() |
Install the crawl control switch assembly to the face plate sub-assembly with the 4 screws.
![]() |
Connect the 4 claws and 2 guides to install the bulb housing sub-assembly to the face plate sub-assembly.
![]() |
Install the 6 screws to the face plate sub-assembly.
| 5. INSTALL NO. 2 ROOF WIRE |
![]() |
Engage the 3 guides and clamp to install the No. 2 roof wire.
| *1 | Clamp |
| *2 | Guide |
Connect the connectors.
| 6. INSTALL PERSONAL LIGHT BULB |
![]() |
Install the 2 personal light bulbs into the 2 personal light bulb sockets.
Turn the 2 personal light bulb sockets with the 2 bulbs in the direction indicated by the arrows in the illustration to install them as a unit.