Home › ENGINE › 1GR-FE LUBRICATION › OIL PRESSURE SWITCH

OIL PRESSURE SWITCH > INSTALLATION > Preparation



EQUIPMENT
Feeler gauge

Precision straight edge

Torque wrench

Drain hose

Oil pressure gauge

Wooden block



LUBRICANT / Standard Engine Oil (for USA, Canada)
Oil grade
Oil Viscosity (SAE)
ILSAC GF-5 multigrade engine oil
0W-20

LUBRICANT / Standard Engine Oil (for Mexico)
Oil grade
Oil Viscosity (SAE)
API grade SL "Energy- Conserving", SM "Energy- Conserving", SN "Resource Conserving" or ILSAC multigrade engine oil
0W-20
5W-20
5W-30
10W-30
API grade SL, SM or SN multigrade engine oil
15W-40
20W-50

LUBRICANT / Standard Oil Capacity
Item
Capacity
Drain and refill without oil filter change
5.7 liters (6.0 US qts, 5.0 Imp. qts)
Drain and refill with oil filter change
6.1 liters (6.4 US qts, 5.4 Imp. qts)
Dry fill
6.9 liters (7.3 US qts, 6.1 Imp. qts)


RECOMMENDED TOOLS
I102194
09012-2C520
Deep Socket Wrench
24mm


I107015
09080-1C111
Toyota Electrical Tester Set



I107018
09080-2C101
Test Lead Set





SSM
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
-
Toyota Genuine Seal Packing 1282B, Three Bond 1282B or equivalent
-
Toyota Genuine Seal Packing Black, Three Bond 1207B or equivalent
-