Home › SUSPENSION & AXLE › SUSPENSION › REAR SHOCK ABSORBER

REAR SHOCK ABSORBER > REMOVAL

for Preparation Click here



1. REMOVE REAR SHOCK ABSORBER ASSEMBLY


    C112178E01
  1. Support the rear axle housing assembly with a jack using a wooden block to avoid damage.



    C103908E01
  1. Remove the bolt and separate the rear shock absorber assembly.

  1. Remove the cushion washer No.4.



    C103907E01
  1. Remove the bolt and rear shock absorber assembly.

  1. Remove the cushion washer No.2.



    C102807
  1. Remove the 2 rear shock absorber bushings from the rear shock absorber assembly.