Home › TRANSMISSION ยท CLUTCH › CLUTCH RELEASE CYLINDER

CLUTCH RELEASE CYLINDER > DISASSEMBLY

for Preparation Click here



1. REMOVE RELEASE CYLINDER BLEEDER PLUG
  1. Remove the bleeder plug cap from the bleeder plug.

  1. Remove the bleeder plug from the cylinder body.



2. REMOVE CLUTCH RELEASE CYLINDER KIT


    C114264E01
  1. Remove the boot from the cylinder body.

  1. Remove the push rod from the cylinder body.

  1. Remove the piston and spring from the cylinder body.

    NOTICE:
    Do not damage the inside of the cylinder body.