Home › TRANSMISSION ยท A340E AUTOMATIC TRANSMISSION › SHIFT LEVER ASSEMBLY

SHIFT LEVER ASSEMBLY > REMOVAL

for Preparation Click here



1. DISCONNECT BATTERY NEGATIVE TERMINAL


2. REMOVE SHIFT LEVER KNOB


    B102830E01
  1. Turn the shift lever knob in the direction indicated by the arrow and remove it.



3. REMOVE SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY


    B102831E01
  1. Manual Transmission:
    Disengage the 6 claws and remove the shifting hole cover assembly.

  1. Automatic Transmission:
    Disengage the 8 claws and remove the shifting hole cover assembly.



4. REMOVE SHIFT LOCK RELEASE BUTTON


    C114651
  1. Remove the shift lock release button from the floor shift position indicator housing.



5. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1


    B102828
  1. Using a clip remover, remove the 2 clips

  1. Disengage the 3 claws and remove the instrument panel No.1 under cover sub-assembly.



6. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER


    B102827E01
  1. Using a clip remover, remove the 2 clips (A).

  1. Disengage the 4 clips (B).

  1. Disconnect the connector.



    B102838
  1. Push the positions indicated by the arrows in the illustration to separate the fuel lid lock control cable and bonnet (hood) control cable assembly from the panel.
    Remove the instrument panel finish lower.



7. REMOVE PARKING BRAKE HOLE COVER


    B102829E01
  1. Disengage the 6 claws and remove the parking brake hole cover.



8. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER


    B102832E01
  1. Disengage the 8 claws and remove the instrument panel finish panel lower center.



9. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    G033583E01
  1. Turn the nut on the transmission control cable counterclockwise.

  1. Disconnect the transmission control cable from the shift lock control unit housing.

  1. Disconnect the end of the transmission control cable from the shift lock control unit.



10. REMOVE SHIFT LOCK CONTROL UNIT ASSEMBLY


    C114660E01
  1. Disconnect the shift lock computer connector and indicator light wire connector.

  1. Remove the 4 bolts and shift control unit assembly.