Home › ENGINE ยท 2KD-FTV › LUBRICATION › OIL FILTER

OIL FILTER > REMOVAL

for Preparation Click here



1. DRAIN ENGINE OIL
  1. Remove the oil filler cap.

  1. Remove the oil drain plug, and drain the engine oil from the oil pan.

  1. Install a new gasket and the drain plug.

    Torque:
    34 N*m{ 347 kgf*cm , 25 ft.*lbf }



2. REMOVE ENGINE SERVICE HOLE COVER NO.2


    A113043
  1. Roll up the carpet.

  1. Remove the 3 bolts and the engine service hole cover No.2.



3. REMOVE OIL FILTER SUB-ASSEMBLY


    A102884E01
  1. Using SST, remove the oil filter.

    SST
    09228-07501  

    HINT:
    Position the drain oil container to collect the oil from the oil filter.