SPEED SENSOR > INSPECTION |
| 1. INSPECT SPEED SENSOR (NCO) |
![]() |
Disconnect the speed sensor connector from the transmission.
Measure the resistance according to the value(s) in the table below.
| Tester Connector | Specified Condition 20°C (68°F) |
| 1 - 2 | 560 to 680 Ω |
| 2. INSPECT SPEED SENSOR (SP2) |
![]() |
Disconnect the speed sensor connector from the transmission.
Measure the resistance according to the value(s) in the table below.
| Tester Connector | Specified Condition 20°C (68°F) |
| 1 - 2 | 560 to 680 Ω |