Home › TRANSMISSION ยท A340E AUTOMATIC TRANSMISSION › TRANSMISSION CONTROL CABLE

TRANSMISSION CONTROL CABLE > REMOVAL

for Preparation Click here



1. REMOVE ENGINE UNDER COVER NO.1


2. REMOVE ENGINE UNDER COVER NO.2


3. REMOVE ENGINE SIDE UNDER COVER LH


4. REMOVE ENGINE SIDE UNDER COVER RH


5. DISCONNECT TRANSMISSION CONTROL CABLE ASSEMBLY


    C101771E02
  1. Remove the clip and nut, and disconnect the transmission control cable assembly from the control shaft lever and transmission control cable bracket No.1.



    C101804E01
  1. Remove the 2 bolts and disconnect thetransmission control cable assembly.



    C101807E01
  1. Disconnect the transmission control cable assembly from the transmission control cable bracket No.2.

  1. Remove the 2 nuts and transmission control cable bracket No.2 from the under body.



6. REMOVE SHIFT LEVER KNOB


    B102830E01
  1. Turn the shift lever knob in the direction indicated by the arrow and remove it.



7. REMOVE FLOOR SHIFT POSITION INDICATOR HOUSING SUB-ASSEMBLY


    B102831E01
  1. Manual Transmission:
    Disengage the 6 claws and remove the shifting hole cover assembly.

  1. Automatic Transmission:
    Disengage the 8 claws and remove the shifting hole cover assembly.



8. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.1


    B102828
  1. Using a clip remover, remove the 2 clips

  1. Disengage the 3 claws and remove the instrument panel No.1 under cover sub-assembly.



9. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER


    B102827E01
  1. Using a clip remover, remove the 2 clips (A).

  1. Disengage the 4 clips (B).

  1. Disconnect the connector.



    B102838
  1. Push the positions indicated by the arrows in the illustration to separate the fuel lid lock control cable and bonnet (hood) control cable assembly from the panel.
    Remove the instrument panel finish lower.



10. REMOVE PARKING BRAKE HOLE COVER


    B102829E01
  1. Disengage the 6 claws and remove the parking brake hole cover.



11. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER


    B102832E01
  1. Disengage the 8 claws and remove the instrument panel finish panel lower center.



12. REMOVE TRANSMISSION CONTROL CABLE ASSEMBLY


    G033583E01
  1. Turn the nut on the transmission control cable counterclockwise.

  1. Disconnect the transmission control cable from the shift lock control unit housing.

  1. Disconnect the end of the transmission control cable from the shift lock control unit.



    C101805E01
  1. Rolled up the floor carpet of the front seat LH and remove 2 bolts and transmission control cable assembly.