EXTENSION HOUSING REAR OIL SEAL > REMOVAL |
| 1. DRAIN AUTOMATIC TRANSMISSION FLUID |
| 2. REMOVE PROPELLER SHAFT ASSEMBLY |
![]() |
Put matchmarks on both flanges.
Remove the 4 nuts, bolts and washers.
Remove the propeller shaft assembly.
![]() |
Insert SST in the transmission to prevent oil leakage.
Use the following SST for the automatic transmission
Use the following SST for the manual transmission
| 3. REMOVE AUTOMATIC TRANSMISSION EXTENSION HOUSING OIL SEAL |
![]() |
Using SST, pull out the oil seal.