Home › BRAKE › BRAKE › LOAD SENSING PROPORTIONING VALVE

LOAD SENSING PROPORTIONING VALVE > REMOVAL

for Preparation Click here



1. DRAIN BRAKE FLUID


2. REMOVE LOAD SENSING W/SPRING VALVE ASSEMBLY


    C102562
  1. Remove the 2 nuts and load sensing spring bracket from the rear axle.



    C102563
  1. Using SST, disconnect the 3 brake tubes from the load sensing with spring valve assembly.

    SST
    09023-00101  

  1. Remove the 2 bolts and the load sensing with spring valve assembly from the body.