Home › BODY › ENGINE HOOD / DOOR › BACK DOOR SUPPORT

BACK DOOR SUPPORT > DISPOSAL

for Preparation Click here



1. DISPOSE OF BACK DOOR STAY ASSEMBLY
  1. Horizontally fix the stay in a vise with the piston-rod pulled out.



    B102097E01
  1. Wearing safety glasses, gradually cut a part between A and B as shown in the illustration using a metal saw to gradually release the gas.

    NOTICE:
    Be careful to cover the area that is being cut as there is a possibility that metal debris could be blown out by the gas (the gas is colorless, odorless and harmless).