Home › ENGINE · 2KD-FTV › FUEL › FUEL TEMPERATURE SENSOR

FUEL TEMPERATURE SENSOR > INSPECTION

for Preparation Click here



1. FUEL TEMPERATURE SENSOR


  1. Inspect the resistance.



      Z017274E11
    1. Using an ohmmeter, measure the resistance between the terminals.

      Resistance:
      2.21 to 2.69 kΩat 20°C (68°F)
      0.287 to 0.349 kΩ at 80°C (176°F)

      NOTICE:
      In case of checking the fuel temperature sensor in the water, be careful not to allow water top go into the terminals, and after checking, wipe out the sensor.