Home › ENGINE ยท 2KD-FTV › EXHAUST › EXHAUST PIPE (for Long Wheelbase)

EXHAUST PIPE (for Long Wheelbase) > REMOVAL

for Preparation Click here



1. REMOVE EXHAUST PIPE ASSEMBLY FRONT
  1. Remove the 4 bolts, 2 nuts and 2 compression springs. 2 gasket and exhaust pipe assembly front.

  1. Disconnect the exhaust pipe support, and remove the exhaust pipe assembly front and 2 gaskets.



2. REMOVE EXHAUST PIPE ASSEMBLY TAIL
  1. Disconnect the exhaust pipe supports, and remove the exhaust pipe assembly tail.