Home › ENGINE ยท 5L-E › EXHAUST › EXHAUST PIPE (for Long Wheelbase)

EXHAUST PIPE (for Long Wheelbase) > REMOVAL

for Preparation Click here



1. REMOVE EXHAUST PIPE SUB-ASSEMBLY FRONT NO.2
  1. Remove the 4 bolts, 2 compression springs.

  1. Disconnect the exhaust pipe support, and remove the exhaust pipe assembly front No.2 and 2 gaskets.



2. REMOVE EXHAUST PIPE SUB-ASSEMBLY FRONT NO.1
  1. Loosen the clamp bolt, and separate the exhaust pipe support bracket No.1 from the exhaust pipe sub-assembly front No.1.

  1. Remove the 3 bolts, exhaust pipe sub-assembly front No.1 and gasket from the exhaust manifold.



3. REMOVE EXHAUST PIPE ASSEMBLY TAIL
  1. Disconnect the exhaust pipe supports, and remove the exhaust pipe assembly tail.