Home › ENGINE ยท 2TR-FE › EMISSION CONTROL › AIR FUEL RATIO SENSOR

AIR FUEL RATIO SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL AIR FUEL RATIO SENSOR


    A102378E01
  1. Using SST, install the air fuel ratio sensor to the exhaust pipe assembly front.

    SST
    09224-00010  

    Torque:
    40 N*m{ 408 kgf*cm , 30 ft.*lbf }

  1. Connect the air fuel ratio sensor connector.



2. INSTALL ENGINE UNDER COVER NO.2 (w/ Engine Under Cover No.2)
  1. Install the engine under cover No.2 together with the engine side under cover LH and engine side under cover RH (for Wide Body).

    Torque:
    13 N*m{ 133 kgf*cm , 10 ft.*lbf }