Home › ENGINE · 2TR-FE › EMISSION CONTROL › AIR FUEL RATIO SENSOR

AIR FUEL RATIO SENSOR > INSPECTION

for Preparation Click here



1. INSPECT AIR FUEL RATIO SENSOR


  1. Inspect the A/F heater.



      A094395E01
    1. Measure the resistance between terminals 1 (HT) and 2 (+B) of the sensor.

      Standard resistance:
      1.8 to 3.4 Ω at 20°C (68°F)

      If the result is not as specified, replace the air fuel ratio sensor.

    2. Measure the resistance between terminals 1 (HT) and 4 (AF-) of the sensor.

      Standard resistance:
      10 kΩ or higher

      If the result is not as specified, replace the air fuel ratio sensor.